Removal of thiosulfate (S2O32-, 200 mg/L) from simulated wastewater samples was investigated under varying co-pollutants and pH conditions employing the titanium dioxide (TiO2) mediated photocatalysis. For thiosulfate only studies higher substrate removal was noted at lower pH with a specific trend of pH 4 > pH 7 > pH 10. Furthermore, near complete thiosulfate removal was also achieved at pH 4. A similar thiosulfate removal trend was also noted for the binary thiosulfate & p-cresol and thiosulfate & thiocyanate systems at pH 4, indicating high photocatalysis process efficiency. However, thiosulfate removal from the mixed systems at pH greater than 4 was slower as compared to the respective thiosulfate only systems. Nevertheless for the binary thiosulfate & thiocyanate system, significant thiosulfate removal was noted even at pH 12 when the thiosulfate concentration was reduced to 40 mg/L.
Vohra, M., Selimuzzaman, S., & Al-Suwaiyan, M. (2011). Aqueous Phase Thiosulfate Removal Using Photo catalysis. International Journal of Environmental Research, 5(1), 247-254. doi: 10.22059/ijer.2010.310
MLA
M.S. Vohra; S.M. Selimuzzaman; M.S. Al-Suwaiyan. "Aqueous Phase Thiosulfate Removal Using Photo catalysis". International Journal of Environmental Research, 5, 1, 2011, 247-254. doi: 10.22059/ijer.2010.310
HARVARD
Vohra, M., Selimuzzaman, S., Al-Suwaiyan, M. (2011). 'Aqueous Phase Thiosulfate Removal Using Photo catalysis', International Journal of Environmental Research, 5(1), pp. 247-254. doi: 10.22059/ijer.2010.310
VANCOUVER
Vohra, M., Selimuzzaman, S., Al-Suwaiyan, M. Aqueous Phase Thiosulfate Removal Using Photo catalysis. International Journal of Environmental Research, 2011; 5(1): 247-254. doi: 10.22059/ijer.2010.310
)